Keeping Your Bathroom Warm Without Blinding Your Kids
Nobody likes stepping onto a freezing bathroom floor in the middle of January. That’s why we use infrared lamps—they give you that instant, cozy heat the second you flip the switch. But there’s a catch. Some of these lamps are so bright they feel like a spotlight in your face, which is a real problem if you’re bathing a baby or just trying to wake up slowly. Fixing the glare Standard lamps throw out a ton of visible light along with the heat. It’s harsh. To fix this, we use special coatings on the quartz glass and a specific gas fill inside the bulb. Think of it like a pair of sunglasses for your lamp. It filters out those piercing blue light peaks and pushes the energy toward the infrared side. You still get all the warmth, but you don’t get that blinding flash that makes you squint. Heat vs. Light It’s a bit of a balancing act. You need enough wattage to fight off the chill of the tiles, but you don’t want your bathroom to feel like an operating room. We tweaked the filament thickness and the temperature it runs at. The result? A soft, warm glow instead of a glaring beam. It feels more natural and way more relaxing. A few things to keep in mind These are designed to pop right into your existing fixtures. Now, because of those eye-protection coatings, the heat might spread a tiny bit differently than a clear bulb. You might notice it takes a few extra seconds to reach full heat, but it’s a small price to pay for not straining your eyes. Just a quick tip: double-check that your fixture is rated for the wattage you’re using. You don’t want things getting too hot. And make sure there’s a bit of airflow around the unit so the electronics don’t fry during a long, cold winter.